|The LD291 is the economical alternative in routine gauge pressure measurement.
This lightweight design eliminates the need for mounting brackets and
Its microprocessor-based electronics allow for total interchangeability
All members of the LD29X series use SMAR’s field proven capacitive sensors. Its special design allows a direct process connection and an optional LCD indicator can be added to provide additional operations
|The LD300 series uses the field-proven technique of
capacitance cell sensor measurement for pressure, level and flow applications.Characteristics:
|The DT300 “Touché” Intelligent Density Transmitter is an instrument developed for the continuous, online measurement of liquid density and concentration, directly in the industrial process.
Its pioneer technology consists of a capacitive type differential pressure sensor coupled to a pair of pressure repeaters immersed in the process. A temperature sensor located between the two pressure repeaters is used to compensate the temperature variations in the process fluid.
A dedicated software, by means of an algorithm, calculates the fluid density.
Depending on the industrial process, density may be expressed in g/cm3, Kg/m3, lb/ft3, Specific Gravity, Brix degree, Gay-Lussac degree, Baumé degree, Plato degree, INPM degree, API degree, Solids %, Concentration %, etc.
Designed for process control applications, these 2-wire transmitters generate a signal proportional to the concentration/density. Digital communication for remote calibration and monitoring is also provided.
|The FI300 line is made up by the FI302 (FOUNDATION™ fieldbus) and FI303 (PROFIBUS-PA) converters.
This equipment makes easier the integration of conventional 4-20 mA equipment with automation systems with digital technology by supporting up to 3 fieldbus control signals to be converted into 4-20mA current signals.
The converted signals can be used for speed control on frequency converters, valve positioners, electric actuators or any other equipment with 4-20mA inputs.
|System302 powerful features and it is completely interoperable with all FOUNDATION™ Fieldbus, HART®, PROFIBUS®, DeviceNet, AS-i and Modbus, besides devices from other manufacturers.
System302 provides several High Speed Ethernet Controllers such as the DF62 and DF63 HSE/FF Controllers; DF73 HSE/Profibus-DP Controller, DF75 HSE Controller and the DF79 HSE/DeviceNet Controller.
|The IF300 line is made up by the IF302 (FOUNDATION™ fieldbus) and IF303 (PROFIBUS-PA) converters. This equipment facilitate the integration of conventional 4-20 mA or 0-20 mA analog equipment with automation systems with digital technology.
One device supports up to 3 analog current signals to be converted into
|The Smar TT300 Series is a transmitter mainly intended for measurement of temperature using RTDs or thermocouples.
However, it can also accept other sensors with resistance or mV output such as: pyrometers, load cells, resistance position indicators, etc. The TT300 Series accepts up to two sensors and may operate in one of the modes: