Industrial 10-port Gigabit Unmanaged Ethernet Switch                            
JetNet 3010G/3010GT
  
JetNet 3010G Industrial 10-port Gigabit Unmanaged Ethernet Switch
  • 7 10/100 Base TX and 3 Gigabit RJ-45/SFP combo,
    (10/100/1000 Base-TX, Gigabit SX/LX)(3010G)
  • 7 10/100 Base TX and 3 10/100/1000 TX (3010GT)
  • Supports Full/Half-Duplex, auto MDI/MDI-X on 10/100TX port, Full-Duplex on Gigabit port
  • 7.4Gbps non-blocking switching performance
  • 8K MAC address auto learning
  • Supports Redundant(12~48VDC,-12~-48VDC) Power Inputs
  • Rigid Aluminum Case Complies with IP31
  • 2KV Hi-Pot for all ports and power
  • -10~70℃ operating temperature
  • DIN-Rail/Wall-Mounting/Desktop Installation
    •    

    DatasheetClick here for brochure

    		  
     Overview
       
    The JetNet 3010G series is an Unmanaged industrial Ethernet Switch. It is equipped 7 ports 10/100TX and 3 ports 10/100/1000 RJ-45 / Gigabit SX/LX SFP combo ports. Or 7 ports 10/100TX and 3 ports 10/100/1000 RJ-45 ports (JetNet 3010GT). To meet industrial environment requirements, features a terminal block to provide wide range power inputs 12-48V and -48V with resverse polarity protection, and the rigid aluminum case design with IP31 standard. Adopting high performance switching architecture to support 7.4G
    non-blocking switching performance and up to 8K MAC address auto learning. JetNet 3010G is the best solution to fulfill the increasing demand on industrial Gigabit Ethernet.

    Flexible, hot-swappable SFP Transceiver
    Gigabit Uplink for high performance requirement
    SFP is the abbreviation of the Small Form-factor Pluggable. It is a compact optical transceiver used in optical communications for data communications applications. JetNet 3010G offers 3 10/100/100 RJ-45 or 3 Gigabit SX/LX SFP combo ports. Korenix also recommend many SFP transceivers for your selection. You can connect the 3 ports to the gigabit backbone network or other applications which need wider bandwidth. The JetNet 3010G with SFP module provides better flexibility to connect with various Gigabit interfaces without stocking different types of the fiber switches. For compatible with your existing fiber construction,
    you can also find the LC to SC or LC to ST fiber cable in the list of accessory order information.

    Korenix SFP Family
    Korenix provides 1000Base-SX/LX SFP which meets SFP GBIC standard. The SFP transceivers can be used with any SFP GBIC compliant slot. With 850nm 1000Base-SX Multi-mode SFP , the distance can support up to 550m. With 1310nm 1000Base-LX Single-mode SFP(SFPGLX10), the distance cansupport up to 10KM. You can also select LHX mode for longer distance. The available SFP transceivers are listed in
    the accessory order information.
     
     
     Specifications
    Technology
    Standard
    IEEE 802.3 10Base-T Ethernet
    IEEE 802.3u 100Base-TX Fast Ethernet
    IEEE 802.3z Gigabit Ethernet
    IEEE 802.3x Flow Control and Back-pressure
     
    Processing
    Store and Forward architecture
    Interface
    Number of Ports
    10/100TX: 7 x RJ-45, Auto MDI/MDI-X, Auto Negotiation
    10/100/1000TX: 3 RJ-45 or Combo with SFP
    Gigabit Fiber: 3 x Gigabit SFP with Hot-Swapable Function
    Network Cable
    10Base-T: 2-pair UTP/STP Cat. 3, 4, 5 cable, EIA/TIA-568 100-ohm (100m)
    100 Base-TX: 2-pair UTP/STP Cat. 5 cable, EIA/TIA-568 100-ohm (100m)
    1000 Base-TX: 4-pair UTP/STP Cat. 5 cable, EIA/TIA-568 100-ohm (100m)
    Optical Fiber
    SFP : Hot-Swapable 1000 Base SX/LX, Single/Multi-mode
    1000Base-SX Multi-mode(850nm) transceiver 550m(SFPGSX)
    Wave-length: 850nm
    Tx Power: -9.5dBm(Min)~-4dBm(Max)
    Rx Sensitivity: -18dBm(Max)
    Linkbudget: 8.5dBm
    1000Base-LX Single-mode(1310nm) transceiver 10KM(SFPGLX10)
    Wave-length: 1310nm
    Tx Power: -9.5dBm(Min)~-3dBm(Max)
    Rx Sensitivity: -20dBm(Max)
    Linkbudget: 10.5dBm
    LED Indicators
    RJ-45 ports: Link/Activity (Green), Full duplex/Collision (Yellow)
    Gigabit Ports: Link/Activity (Green)
    Power: Power 1 On(Green) / Power 2 On(Green)
    Power
    2 set of power Input
    Performance
    Transfer Rate
    Wire Speed:14,880 pps for 10M, 148,800 pps for 100M, 1488100 for Gigabit
    Transfer Packet Size
    64 bytes to 1522 bytes (with VLAN tag)
    MAC Address
    8K MAC address table
    Memory Buffer
    1Mbits
    Back-plane
    7.4 Gbps
    Power Requirements
    Power Supply
    Input Voltage: 24 VDC (12~ 48 VDC / -12~-48VDC), Dual Power Inputs
    Reverse Polarity Protection: Present
    Power Consumption
    15 Watts
    Mechanical
    Installation
    DIN-rail kit and wall-mounting ear
    Casing
    IP-31 protection, aluminum case
    Dimensions
    96 mm (W) x 137 mm (H) x 119mm (D)
    Environmental
    Operating Temperature
    -10 to 70℃ (14 to 158°F)
    Operating Humidity
    5% to 95% (Non-condensing)
    Storage Temperature
    -40 to 85℃(-40 to 185°F)
    2KV Hi-Pot
    for all ports and power
    Regulatory Approvals
    EMI
    FCC Class A, EN55022 Class A
    EMC
    EN61000-4-2, EN61000-4-3, EN61000-4-4
    EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11
    Safety
    UL, cUL, EN60950
    Shock
    IEC 60068-2-27
    Free Fall
    IEC 60068-2-32
    Vibration
    IEC 60068-2-6
    MTBF
    at least 200000 hours
    MIL-HDBK-217F GB (MILITARY HANDBOOK) standard
    Warranty
    Global 5 years
     
     Ordering Information
    JetNet 3010G Industrial 10-Port Unmanaged Ethernet Switch with 3 Gigabit RJ45/SFP Combo Ports
    Includes:
     
  • 7-ports 10/100Base-TX and 3 10/100/1000 RJ-45/Gigabit SFP Combo ports Switch
  • Quick Installation Guide
  • Documentation CD-ROM
  • Wall mounting plate and six screws

    JetNet 3010GT Industrial 10-Port Unmanaged Ethernet Switch
    Includes:
  • 7-ports 10/100Base-TX and 3 10/100/1000 RJ-45 Switch
  • Quick Installation Guide
  • Documentation CD-ROM
  • Wall mounting plate and six screws

    • © 2008 Allpronix. All rights reserved.