|The DXN is simply the best option for your next portable flow meter application, with true hybrid transit time and Doppler operation, an expandable 1GB data logger that takes readings over 100 times a second, and the ability to store site-specific parameters using plain English site descriptions. Take control of your toughest applications, add the DXN Portable to your flow measurement toolkit today.
Features and benefits include:
|The Series TFXL ultrasonic flow meter clamps onto the outside of a pipe and does not contact the internal liquid. This advanced product provides instantaneous rate and accumulated flows along with 4-20 mA and pulse outputs. Inherent advantages over competitive technologies include ease of installation, and a large, bi-directional measuring range. In addition, the non-contact design eliminates many fluid compatibility issues. The TFXL is housed in an enclosure suitable for outdoor mounting and is available with or without a local display. Compact integral mount systems can accommodate pipes/tubing 2 inches (DN 50 mm) and smaller. Remote mount systems are also available for pipe/tubing sizes ½ inch (DN 15 mm) and higher. A software utility is available for customer configuration and in-field calibration.|
|The MJK Flow Converter is designed for measuring and recording water flow in open ducts and channels. The MJK Flow Converter is a complete instrument for the measuring of instantaneous flow and recording of accumulated water flow. It can be adapted to any type of weir or flume.
|EMA’S FL0011 and FL0003 works on the calorimetric principle, this flow measurement is based on two temperature sensors in close contact with the fluid but thermal insulated from each other. One of the two sensors is constantly heated and the cooling effect of the flowing fluid is used to monitor the flow. In a stationary no flow fluid condition there is a constant temperature difference between the two temperature sensors. When the fluid flow increases, heat energy is drawn from the heated sensor and the temperature difference between the sensors are reduced. The reduction is proportional to the flow rate of the fluid. These units are available in AC or DC supply and outputs of 4-20mA and Relay, Model FL0011, PNP and NPN, Model FL0003. Sensing range for liquids are 3 -300cm/s and for gases it ranges from 200 to 3000cm/s Calorimetric and smart flow sensor: Integrated display, controller and sensing element. The user can set the flow range and the warning signal discretionarily via the pushbuttons. The display includes a 10 LED flow rate indicator. The design uses no moving parts, which increased the reliability.
|Electromagnetic flow meters are used to measure the volumetric flow of conductive liquid and in sealed pipes. We have supplied our meters to the following industries: petrochemical, mining, steel-iron metallurgy, water treatment and conservation, power generation, paper & pulp and recently in the food and beverage industry.